Call Today

 

How do you actually feel when it comes to What Would Cause My Electric Water Heater to Stop Working??

Lots of contemporary houses use an electrical water heater for their furnace, as a result of its convenience and also ease of use. Nevertheless, similar to any other electrical appliances, troubles might develop with its use, all of a sudden. It can be actually irritating to awaken to a cold shower instead of a warm one or having your bathroom with water that isn't warm enough or even too warm. Whatever the instance might be, hot water heater problems can be rather nerve-racking. Thankfully, we've made a list of feasible solutions to your water heater issues. There are a variety of aspects that could cause a number of these problems, maybe an issue with the power supply, the electrical burner, or the thermostat. Prior to doing anything, guarantee you shut off the main power supply for safety. Whatever the trouble is, getting it repaired should not posture way too much of a problem if you adhere to these steps:

 

Call A Specialist:

If after changing all faulty components and also resetting your temperature level, the water heater still isn't functioning, you might need to get in touch with a professional plumber for an expert opinion. The trouble with your heating unit could be that the hot and cold faucets have been changed or it may be undersized for the quantity of warm water needed in your house. Whatever the instance may be, a professional plumber would help address the trouble.

 

Examine Your Power Supply:

As standard as this might seem, it is really required. Without appropriate power, your water heater will not function. So the first thing to do when your water unexpectedly stops working is to validate that it isn't a power issue. Examine if the fuse is burnt out or the breaker stumbled. If the breaker is the issue, just transform it off and on once again. Change any type of broken or worn-out fuse. Check the home appliance with power after these adjustments to see if it's currently functioning.

 

Examine Your Thermostat:

If your water heater still isn't working or the water appearing isn't warm enough, you might need to examine the temperature settings on your top thermostat. Ensure the breaker is turned off before doing anything. Open up the accessibility panel as well as press the red switch for temperature level reset over the thermostat. This must assist heat the water. Turn the breaker back on and inspect if the issue has been settled.

 

Examine the Burner in the Water Heater:

If it's not a power trouble, after that try having a look at your heating element if it is still functioning. Examine each of your heating elements to make sure the trouble isn't with any one of them. If any one of them is damaged, change that part and then inspect whether the hot water is back on.

 

Conclusion

Water heater troubles are not always major. A number of them are due to small problems like a blown fuse or damaged burner. Changing the faulty parts ought to work. However, if you are still incapable to solve the problem, give a call to your closest plumber to come to get it taken care of.

 

What Would Cause My Electric Water Heater to Stop Working?

 

Your water heater is one of the most forgotten-about appliances in your home—until it quits working. Once you realize that there’s no hot water, the water heater jumps up to become the most noticeable appliance you have. No one in your family will be happy until you get the water heater fixed.

To fix an electric water heater as soon as possible, follow the troubleshooting advice discussed below.

 

Basic Water Heater Troubleshooting

 

Fortunately, you may be restore the hot water supply simply by resetting the house circuit breaker for the water heater. A tripped circuit breaker is one of the top causes of water heater failures. Shut the hot water heater breaker off then turn it back on. Give the water heater a half hour to heat up (if it’s working) and then check for hot water through one of your faucets.

If you get hot water after resetting the breaker, then the problem may be fixed if the breaker inadvertently tripped and it doesn’t continue tripping.

If the water heater breaker trips again, then you’ll likely need to have a service technician examine and repair the water heater. The service technician will check the circuit breaker and electrical supply wiring for the water heater. A short in the supply wiring or a bad circuit breaker could be causing the breaker to trip. An internal failure such as a broken heating element can also cause the breaker to continue tripping.

When resetting the water heater circuit breaker doesn’t work at all, then the water heater may be getting power while an internal water heater failure is causing the problem.

 

Conduct Advanced DIY Water Heater Troubleshooting

 

If the water heater doesn’t work after resetting the high-temperature limit switch, then you’ll need to either conduct some advanced water heater troubleshooting or have a service technician diagnose and repair the water heater failure.

Sears Technicians created a safe and highly-successful DIY advanced troubleshooting video to help you determine the cause of a water heating failure if you want to try to fix the problem yourself. Follow the advice in this video to find and fix the cause of the heating failure on your own:

 

The video begins with the basic troubleshooting described in the first 2 sections described above. It then goes on to guide you through checking water heater components to safely find the cause of the water heating failure.

If you get to a point in the troubleshooting where you’re not completely confident that you can safely continue, schedule a service technician to diagnose and repair the water heater.

The DIY water heater troubleshooting shown in the above video differs from the diagnosis techniques that service technicians typically use when examining a water heater to find the cause of a heating failure. Safe DIY troubleshooting doesn’t rely on live voltage checks while service technicians often use live voltage checks to quickly find the cause of water heater failures.

While many DIY’ers have been able to find the cause of water heater failures using troubleshooting advice shown in the video, some failures such as a bad circuit breaker can only be found using live voltage checks which should only be conducted by a trained service technician.

Sears Technicians have the training, tools and expertise to quickly find the cause of a water heater failure. Rely on our technicians to diagnose and repair your water heater or any other appliance in your home that quits working.

While the technician is in your home, take advantage of appliance Cleaning & Maintenance offers that the tech discusses with you. Keeping your appliances well-maintained will help them work more efficiently and last longer. Regular professional maintenance will also help prevent costly breakdowns of the appliances you depend on every day.

https://www.searshomeservices.com/blog/what-would-cause-my-electric-water-heater-to-stop-working

 

We are very enthusiastic about How to Troubleshoot and Repair an Electric Water Heater and I'm hoping you enjoyed reading the blog posting. Sharing is nice. You won't know, you may be doing someone a favor. Many thanks for taking the time to read it.

Results guaranteed, contact!